K-Bond POLY-EPOXY Knife Grade is a premium quality, vinyl ester blend adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible with increased bonding strength compared to standard polyester adhesives. Uses include bonding, laminating, installation of pieces and repairs.
- Combines polyester and epoxy resin technology
- Stronger than standard polyester stone adhesive
Strongest bond available in a polyester formula
Great for seaming and laminating all stone types including dense granite
Uses the same white paste BPO hardener as our polyesters
Gel time of 4-6 minutes
Fully cured in 25-30 minutes
Excellent choice for indoor applications
|Attributes:||Clear formulation with better UV stability. Gel won’t sag on vertical surfaces.|
|Working Time:||4 to 6 minutes|
|Tack Free:||10 to 20 minutes|
|Machinable:||20 to 30 minutes|
|Recommended Application:||Natural and engineered stone.|
|Recommended Use:||Seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods.|
Make sure stone surfaces are clean of any substance and dry.
- Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
- Next carefully mix the components together. Be careful to scrape the sides and bottom of mixing cup to ensure thorough mixing.
- Do not “stir” product. This can trap air and cause bubbles.
Overworking of product can cause the product to become thinner.
Do not use once gelling has begun.
- Ensure good ventilation
- Wear gloves and safety glasses
For further information, please consult the Material Safety Data Sheet.
|Five Gallon Bucket||1|