Product Overview
K-Bond POLYESTER White Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.
Description
- Pre-colored paste consistency polyester adhesive
- Glossy white finish used mainly for polished stone
Fast curing
Used for seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods
Good adhesion to natural stone up to 70 degrees C or 160 degrees F
Resistant to water and oil
Consistency: | Paste |
Attributes: | White color formulation for white or light colored natural and engineered stone. Paste won’t sag on vertical surfaces. |
Working Time: | 5 to 7 minutes |
Tack Free: | 10 to 30 minutes |
Machinable: | 30 to 60 minutes |
Usage Location: | Interior |
Recommended Application: | Natural and engineered stone. |
Recommended Use: | Seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods. |
Processing Conditions
Make sure stone surfaces are clean of any substance and dry.
- Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
- Next carefully mix the components together. Be careful to scrape the sides and bottom of mixing cup to ensure thorough mixing.
- Do not “stir” product. This can trap air and cause bubbles.
Overworking of product can cause the product to become thinner.
Do not use once gelling has begun.
Safety Precautions
- Ensure good ventilation
- Wear gloves and safety glasses
For further information, please consult the Material Safety Data Sheet.
Size | Sales Unit |
---|---|
Quart | 6 |
Gallon | 2 |
Imperial Gallon | 4 |
Five Gallon Bucket | 1 |
All information on this page is deemed correct, but subject to verification and not guaranteed.