TSI 200 is an impregnated sealer formulated for the protection of sanded grouts and most porous substrates. It penetrates into the pores of the treated surface to form a barrier that is resistant to moisture and stains while allowing complete vapor transmission. TSI 200 is not a surface coating, hence, it will not alter treated surfaces. All surfaces are harder and less slippery. TSI 200 allows maximum penetration while supplying maximum coverage for cost effective performance. It is UV Stable, resists acid rain, and inhibits the growth of mold, mildew and fungus in humid, damp areas.
- Latest solvent-based fluoropolymer technology
- Maximum performance, natural look sealer that protects against all stains
Allows proper air transmission through the stone
FDA compliant solvent
Interior and exterior use
|Cure Time:||24 to 72 hours|
|Usage Location:||Interior or Exterior|
|Recommended Application:||Sanded grouts and most porous substrates.|
|Recommended Use:||Provides water stain, oil stain and slip protection for sanded grout, flamed and honed granite, marble, limestone, terra cotta paver, cantera/adoquin, saltillo tile, slate, sandstone, flagstone, cement, masonry, concrete tile, pre-cast concrete, shell stone and brick.|
For detailed usage instructions, please consult the Technical Data Sheet.
|Five Gallon Bucket||1|
|Fifty-Five Gallon Drum||1|
All information on this page is deemed correct, but subject to verification and not guaranteed.